Job Availability

The position requires:

• Work with modification of avionics within the aircrafts SAAB 340 and 2000, and Bombardier Global 6000 experience is an advantage
• Wiring, mount connectors, cable modifications connectors, extensions, connect racks to equipment etc.
• Soldering Certification is a must
• Start ASAP for 6 months with good possibility for 6 more months. Based in Linkoping
• Only NATO born citizens

The position requires:

• Sheet metal experience but not essential
• No certification needed but experience of 340
• Mission in Dubai
• Swedish passports required

Terms and conditions to be confirmed.

The position requires:
• Competency in Catia V5 2D&3D essential
• Good knowledge of GD&T (3DCS an advantage)
• Experienced with both Metallic & CFRP Aircraft and/or Spacecraft structures
• Educated to HNC/HND/Degree in Mechanical or Aeronautical Engineering

The position requires:
• 10 years plus V5 experience.
• Experience in EC1 (electrical add on licence based on CATIA V5)
• at least 6 months Electrical Design experience.

We seek someone for a contract role, long term assignment.

Supporting the area of AIT (Assembly, Integration and Test) for a mechanisms Product Unit.

• Dipl. Ing, MSC or BSc in the field of engineering.
• Sophisticated knowledge and experience in the field of measurement technology.
• Experience as Technical Responsible for the development of equipment in close contact with the design and procurement department.
• At least 3 years experience in relevant field.
• Very good written and oral English and German language.
• Willing to work self dependent in a motivated and young team.

The tasks would be as follows :

• Defining customised set ups.
• Engineering these set ups: Structures (strength, dynamic, thermo elastic), electronics (picking the right components, no design of complex circuits needed, data acquisition systems, sensors), software : Labview, Python)
• Commissioning these set ups.
• Performing initial tests.
• Documenting these results.
• Handing over set ups for series production (industrial size series, not space size series, therefore reliability and automation an important factor).

All questions to stan.lewry@tseag.com

Switzerland

This position requires experience in Cabin Liners, Cabinets Fix Provisions Oxygen Systems (for one position) Solidworks

Switzerland – some time in USA

The position involves:
• Detailing and definition of assembly procedures for payload fairing structures
• Detailing and definition of assembly procedures for 360° composite structures
• Creation of complete set of manufacturing work instructions
• Integration of sub-systems and interface rings into composite structure
• Support the definition, verification and validation of new production layouts/processes
• Knowledge of composite and metallic manufacturing steps and procedures incl. definition of necessary J&T concepts
(support from/to J&T dept.)
• Task manager capabilities (coordination and ctrl. of budget and work packages)
• Good team player, works closely with System Engineer to collect inputs coming from flight h/w design.
• High flexibility and open to a changing environment
• Industrial engineer with hand-on experience preferred
• Hands-on experience with composite manufacturing and machining/integration/… preferred
• Supervision/support of assembly/integration production start in the US
• Fluent in German (written+spoken) preferredThe position requires:
• 10 years plus V5 experience.
• Experience in EC1 (electrical add on licence based on CATIA V5)
• at least 6 months Electrical Design experience.

Performance Engineer with experience on twin engine type of aircraft in FAR / EASA parts 23 and/or FAR25
Please find hereinafter the job and profile descriptions.

The position involves:
• Conducting different aircraft & engine performance analyses, both preliminary aircraft design and for
development/certification to    FAR/CS 23/25 requirements.
• Creating charts and tables for different aircraft documentation (AFM, FCOM, QRH).
•  Writing and reviewing technical reports, including internal support documentation (work statements and test plans) as
well as reports for Airworthiness Authorities.
• Providing support to performance flight testing: validate and document flight test requirements, review flight test plans,
define necessary – instrumentation, analyze performance data, summarize flight test results and write supporting
documentation.
• Providing support to sales, Customer Engineering, Airworthiness.

Candidate’s profile
• Bachelor’s or Master’s degree in Aerospace from an accredited university.
• Knowledge of FORTRAN, Matlab, MS-Office.
• 5-10 years or more of relevant experience.
• Fluency in English both spoken and written, German is advantageous.Switzerland – some time in USA

The position involves:
• Detailing and definition of assembly procedures for payload fairing structures
• Detailing and definition of assembly procedures for 360° composite structures
• Creation of complete set of manufacturing work instructions
• Integration of sub-systems and interface rings into composite structure
• Support the definition, verification and validation of new production layouts/processes
• Knowledge of composite and metallic manufacturing steps and procedures incl. definition of necessary J&T concepts
(support from/to J&T dept.)
• Task manager capabilities (coordination and ctrl. of budget and work packages)
• Good team player, works closely with System Engineer to collect inputs coming from flight h/w design.
• High flexibility and open to a changing environment
• Industrial engineer with hand-on experience preferred
• Hands-on experience with composite manufacturing and machining/integration/… preferred
• Supervision/support of assembly/integration production start in the US
• Fluent in German (written+spoken) preferredThe position requires:
• 10 years plus V5 experience.
• Experience in EC1 (electrical add on licence based on CATIA V5)
• at least 6 months Electrical Design experience.

The position requires:
• Competency in Catia V5 2D&3D essential
• Good knowledge of GD&T
• Experienced in MGSE Design
• Educated to HNC/HND/Degree in Mechanical or Aeronautical Engineering

We have a number of positions available for a prestigious Space Launcher project, and invite prospective candidates to submit CV’s as soon as possible. 

Experience within the following is essential –
• Aerodynamics and Aerothermal Analysis
• General Loads
• Structures and Component follow on
• Dynamics & Vibro-acoustics (low frequency coupled analysis, broadband and shock)
• Thermo-coupled AnalysisThe position requires:
• Competency in Catia V5 2D&3D essential
• Good knowledge of GD&T (3DCS an advantage)
• Experienced with both Metallic & CFRP Aircraft and/or Spacecraft structures
• Educated to HNC/HND/Degree in Mechanical or Aeronautical EngineeringPerformance Engineer with experience on twin engine type of aircraft in FAR / EASA parts 23 and/or FAR25
Please find hereinafter the job and profile descriptions.

The position involves:
• Conducting different aircraft & engine performance analyses, both preliminary aircraft design and for
development/certification to    FAR/CS 23/25 requirements.
• Creating charts and tables for different aircraft documentation (AFM, FCOM, QRH).
•  Writing and reviewing technical reports, including internal support documentation (work statements and test plans) as
well as reports for Airworthiness Authorities.
• Providing support to performance flight testing: validate and document flight test requirements, review flight test plans,
define necessary – instrumentation, analyze performance data, summarize flight test results and write supporting
documentation.
• Providing support to sales, Customer Engineering, Airworthiness.

Candidate’s profile
• Bachelor’s or Master’s degree in Aerospace from an accredited university.
• Knowledge of FORTRAN, Matlab, MS-Office.
• 5-10 years or more of relevant experience.
• Fluency in English both spoken and written, German is advantageous.Switzerland – some time in USA

The position involves:
• Detailing and definition of assembly procedures for payload fairing structures
• Detailing and definition of assembly procedures for 360° composite structures
• Creation of complete set of manufacturing work instructions
• Integration of sub-systems and interface rings into composite structure
• Support the definition, verification and validation of new production layouts/processes
• Knowledge of composite and metallic manufacturing steps and procedures incl. definition of necessary J&T concepts
(support from/to J&T dept.)
• Task manager capabilities (coordination and ctrl. of budget and work packages)
• Good team player, works closely with System Engineer to collect inputs coming from flight h/w design.
• High flexibility and open to a changing environment
• Industrial engineer with hand-on experience preferred
• Hands-on experience with composite manufacturing and machining/integration/… preferred
• Supervision/support of assembly/integration production start in the US
• Fluent in German (written+spoken) preferredThe position requires:
• 10 years plus V5 experience.
• Experience in EC1 (electrical add on licence based on CATIA V5)
• at least 6 months Electrical Design experience.